RUNPOSTICKS red (hard) - cable pulling aid for not guided pipelines, Length: 2 x 1 m/3,28 ft., Ø 7,5

RUNPOSTICKS red (hard) - cable pulling aid for not guided pipelines, Length: 2 x 1 m/3,28 ft., Ø 7,5

24.40 CHF

RUNPOSTICKS red (hard) - cable pulling aid for not guided pipelines, Length: 2 x 1 m/3,28 ft., Ø 7,5

24.40 CHFNew basalt technology makes the most extreme bending radii possible, yet the rods remain dimensionally stable. No rusting - due to stainless steel connections, no joint edges. The uniform RUNPOTEC RTG Ø 6 mm thread allows a wide variety of combinations. All accessories can be screwed on without an additional adapter. Excellent in combination with the RUNPOTEC RC 2 multifunctional camera. Optimal area of application: suspended ceilings, cable shafts, hollow walls, retroactive wiring of non-routed cables, underfloor shafts, bushings etc.. Application video: a short, very informative application video can be viewed by scanning the QR code or on www.RUNPOTEC.com. Scope of supply: 2 x RUNPOSTICKS red Ø 7,5 mm - Length: 2 x 1 m
RUNPOSTICKS red (hard) - cable pulling aid for not guided pipelines, Length: 2 x 1 m/3,28 ft., Ø 7,5

RUNPOSTICKS red (hard) - cable pulling aid for not guided pipelines, Length: 2 x 1 m/3,28 ft., Ø 7,5

20.00 CHF

RUNPOSTICKS red (hard) - cable pulling aid for not guided pipelines, Length: 2 x 1 m/3,28 ft., Ø 7,5

20.00 CHFNew basalt technology makes the most extreme bending radii possible, yet the rods remain dimensionally stable. No rusting - due to stainless steel connections, no joint edges. The uniform RUNPOTEC RTG Ø 6 mm thread allows a wide variety of combinations. All accessories can be screwed on without an additional adapter. Excellent in combination with the RUNPOTEC RC 2 multifunctional camera. Optimal area of application: suspended ceilings, cable shafts, hollow walls, retroactive wiring of non-routed cables, underfloor shafts, bushings etc.. Application video: a short, very informative application video can be viewed by scanning the QR code or on www.RUNPOTEC.com. Scope of supply: 2 x RUNPOSTICKS red Ø 7,5 mm - Length: 2 x 1 m
XB 500 APR - adapter plate - roller with 4 transport rollers incl. parking brake, special plastic, Ø

XB 500 APR - adapter plate - roller with 4 transport rollers incl. parking brake, special plastic, Ø

176.00 CHF

XB 500 APR - adapter plate - roller with 4 transport rollers incl. parking brake, special plastic, Ø

176.00 CHFThe XB 500 APR - adapter plate - Roller can be connected to the XB 500 or XB 500 T professional cable roller. This enables optimal unwinding and rolling of pipe, cable bundles or cable drums. The adapter plate can be quickly connected to the XB 500 or XB 500 T and separated again using the fixing brackets and the quick-release lever on the underside. Thanks to the four transport rollers with parking brake on the underside of the adapter plate, the combination can be moved effortlessly on smooth surfaces or held in a desired position. In this combination, the XB 500 and XB 500 T can hold up to 80 kg. Optimum field of application: for movement on smooth surfaces or holding a desired position. Application film: You can watch a short, very informative application film by scanning the QR code or at www.runpotec.com.
XB500 APF - adapter plate - feet with 4 fold-out feet, special plastic and stainless steel joints, Ø

XB500 APF - adapter plate - feet with 4 fold-out feet, special plastic and stainless steel joints, Ø

176.00 CHF

XB500 APF - adapter plate - feet with 4 fold-out feet, special plastic and stainless steel joints, Ø

176.00 CHFThe XB 500 APF - adapter plate - Feet can be connected to the XB 500 or XB 500 T professional cable roller. This enables optimal unwinding and rolling of pipe, cable bundles or cable drums on steel-laminated concrete ceilings during the construction phase. The adapter plate can be quickly connected to the XB 500 or XB 500 T and separated again using the fixing brackets and the quick-release lever on the underside. The four fold-out feet allow the XB 500 and XB 500 T to stand higher (21 cm) on the ceiling to be concreted, preventing it from slipping and ensuring trouble-free rolling. In this combination, the XB 500 and XB 500 T can hold up to 80 kg. Optimum area of application: for optimum rolling and unrolling on steel-lined concrete slabs. Application film: You can watch a short, very informative application film by scanning the QR code or at www.runpotec.com.
Multifunction mandrel - attachment for X BOARD XB 300 und XB 500, special plastic, Ø 72 mm/2,8346

Multifunction mandrel - attachment for X BOARD XB 300 und XB 500, special plastic, Ø 72 mm/2,8346

67.00 CHF

Multifunction mandrel - attachment for X BOARD XB 300 und XB 500, special plastic, Ø 72 mm/2,8346

67.00 CHFThe multifunction mandrel has been specially developed for the X BOARD XB 300 and XB 500 cable rolling systems. Loose cable bundles can also be rolled by attaching them to the stainless steel centre mandrel of the XB 300 and then folding out the 4 side brackets. The telescopic centre mandrel measures 72 mm in diameter. It is therefore also ideal for rolling a thinner cable bundle with a small inner diameter or individual wires. The normal height of the multifunction mandrel is 196 mm, which can be extended up to max. 294 mm via the telescopic mechanism. This means high cable bundles or corresponding tube bundles can also be rolled. When the 4 side brackets are unfolded, there is a total contact surface of 430 mm in diameter. Ideally, this should correspond to the respective cable or tube bundle. A designated opening allows the unit to be combined with the RUNPOSTICKS. Optimum area of application: rolling of loose cable bundles or individual wires up to a max. height of 294 mm and a max. diameter of 430 mm Application video: a short, very informative application video can be viewed by scanning the QR code or on www.RUNPOTEC.com. Scope of supply: 1 x Multifunction mandrel
X BOARD mandrel - for profi-cable roller XB 300 and XB 500, special plastic, Ø 45 mm/1,7717

X BOARD mandrel - for profi-cable roller XB 300 and XB 500, special plastic, Ø 45 mm/1,7717

12.90 CHF

X BOARD mandrel - for profi-cable roller XB 300 and XB 500, special plastic, Ø 45 mm/1,7717

12.90 CHFThe X BOARD mandrel is used to expand the existing stainless steel mandrel to centre larger drums. Suitable for X BOARD XB 300 and XB 500 professional cable unwinders. Application video: You can watch a short, very informative application video by scanning the QR code (top left) or on www.RUNPOTEC.com. Scope of supply: 1 x X BOARD mandrel
RUNPOTEC system case with UNIVERSAL case insert - PP plastic (impact and shock resistant), stackable

RUNPOTEC system case with UNIVERSAL case insert - PP plastic (impact and shock resistant), stackable

66.30 CHF

RUNPOTEC system case with UNIVERSAL case insert - PP plastic (impact and shock resistant), stackable

66.30 CHFThe system case with UNIVERSAL case insert offers space for storing a RUNPO5, an X BOARD XB 300 cable drum dispenser, a multi mandrel attachment or a cable lubricant (spray, foam or gel) and cable pulling grip (sock). One advantage is the fast click system, which allows the boxes to be connected to each other without effort and disconnected again at the push of a button. The boxes are easily stackable thanks to the quick click system. The W-BOXX can be seamlessly integrated into the Sortimo Globelyst system. The high-quality and lightweight W-BOXX made of PP plastic is impact and shock resistant and splash-proof. Scope of supply: 1 x System case with UNIVERSAL case insert (without contents)