RUNPOGLIDER with swivel Ø 7 mm/0,2756 in. - flexible guide head, RUNPOTEC thread RTG Ø 6 mm,

RUNPOGLIDER with swivel Ø 7 mm/0,2756 in. - flexible guide head, RUNPOTEC thread RTG Ø 6 mm,

34.90 CHF

RUNPOGLIDER with swivel Ø 7 mm/0,2756 in. - flexible guide head, RUNPOTEC thread RTG Ø 6 mm,

34.90 CHFRUNPOGLIDER with swivel and RUNPOTEC RTG Ø 6 mm thread. Patented viewfinder with extremely good bending and sliding properties. Very high breaking load of 270 kg, no need to change the eyelet head, extra large eyelet hole for higher cable capacity - up to 7 x 2.5 mm². Suitable for POWER REX, RUNPOSTICKS, fiberglass rod Ø 4.5 mm and Ø 6 mm. The integrated swivel allows the cable to rotate in the pipe and thus protects the push-in system and the cable enormously. Numerous stable safety reinforcements in the connection between the spiral strand and the RUNPOGLIDER guarantee highest protection against breakage (Ø 6 mm > 170 kg / Ø 7 mm > 270 kg) for RUNPOGLIDER spirals. The universal special eyelet head is not only ideal for pushing in cable pulling straps, it is also used for the actual pulling-in of the cables. It is thus not necessary to change the head! The extra large eyelet of the special eyelet head can accommodate more cables of up to 7 x 2.5 mm². This saves you valuable time! Application video: a short, very informative application video can be viewed by scanning the QR code or on www.RUNPOTEC.com. Scope of supply: 1 x RUNPOGLIDER with swivel Ø 7 mm with thread RTG Ø 6 mm
RUNPOGLIDER front thread RTG Ø 6 mm - flexible guide head, with swivel and unscrewable eyelet Ø 7

RUNPOGLIDER front thread RTG Ø 6 mm - flexible guide head, with swivel and unscrewable eyelet Ø 7

36.10 CHF

RUNPOGLIDER front thread RTG Ø 6 mm - flexible guide head, with swivel and unscrewable eyelet Ø 7

36.10 CHFThe RUNPOGLIDER with front RTG Ø 6 mm thread is optimally suited for the multifunctional camera developed by RUNPOTEC. This allows the RUNPOCAM RC 2 to be adapted to various fiberglass rods or to the RUNPOSTICKS. Of course the RUNPOGLIDER front thread can also be used as a viewfinder with extremely good bending and sliding properties and high breaking load with all RUNPOTEC RTG Ø 6 mm threads. Also all RUNPOTEC cable pulling grip (sock) with RTG Ø 6 mm thread can be attached. The enclosed eyelet also allows for immediate pulling in of cables. An extra large eyelet hole provides for a higher cable intake of up to 7 x 2.5 mm². Also suitable for RUNPOSTICKS, fiberglass rod Ø 4.5 mm and Ø 6 mm. Scope of supply: 1 x RUNPOGLIDER with front thread RTG Ø 6 mm, 1 x unscrewable eyelet RTG Ø 6 mm thread
Roller Ø 25 mm/0,9843 in., thread RTG Ø 6 mm, aluminium/stainless

Roller Ø 25 mm/0,9843 in., thread RTG Ø 6 mm, aluminium/stainless

22.30 CHF

Roller Ø 25 mm/0,9843 in., thread RTG Ø 6 mm, aluminium/stainless

22.30 CHFFor simplified sliding or rolling in empty pipes. The roller is compatible with fiberglass rod Ø 4.5 mm, 6 mm or for the RUNPOSTICKS. For RUNPOTEC RTG Ø 6 mm thread Application video: a short, very informative application video can be viewed by scanning the QR code or on www.RUNPOTEC.com. Scope of supply: 1 x Roller Ø 25 mm with thread RTG Ø 6 mm
Shackle with RTG Ø 6 mm thread, stainless steel/galvanised

Shackle with RTG Ø 6 mm thread, stainless steel/galvanised

18.60 CHF

Shackle with RTG Ø 6 mm thread, stainless steel/galvanised

18.60 CHFFor attaching cables, pulling wires or pulling ropes. Shackle for fiberglass rod Ø 4.5 mm, 6 mm or RUNPOSTICKS. Application video: a short, very informative application video can be viewed by scanning the QR code or on www.RUNPOTEC.com. Scope of supply: 1 x Shackle with RTG Ø 6 mm thread
Fishing hook set with thread RTG Ø 6 mm, 4 pieces, stainless

Fishing hook set with thread RTG Ø 6 mm, 4 pieces, stainless

29.90 CHF

Fishing hook set with thread RTG Ø 6 mm, 4 pieces, stainless

29.90 CHFAll catch hooks have been developed primarily for the RUNPOSTICKS in order to cope with the most varied situations in cable installation. The hooks can also be used for all fiberglass rods by RUNPOTEC (Ø 3 mm - 4.5 mm - 6 mm - 7.5 mm - 9 mm - 11 mm - 15 mm).Optimally suited: To catch loose pull-in straps or pull them towards you. To fish for cables or pipes that are in corners or against walls. As a small variant to the RUNPOTEC sliding hook to glide over various obstacles and fish for cables or pipes. To fish for cables and pipes with a large diameter. Application video: a short, very informative application video can be viewed by scanning the QR code or on www.RUNPOTEC.com. Scope of supply: 4 x Different fishing hooks with thread RTG Ø 6 mm (see Data sheet)
Magnet fishing-set, thread RTG Ø 6 mm, 4-part, Ø 10 mm/0,3937 in. and 14 mm/0,5512 in., holding

Magnet fishing-set, thread RTG Ø 6 mm, 4-part, Ø 10 mm/0,3937 in. and 14 mm/0,5512 in., holding

28.20 CHF

Magnet fishing-set, thread RTG Ø 6 mm, 4-part, Ø 10 mm/0,3937 in. and 14 mm/0,5512 in., holding

28.20 CHF"Consists of 2 x initial bulbs for magnetic adhesion, 1 x magnetic ball Ø 10 mm with 1,5 kg holding force and 1 x magnetic ball Ø 14 mm with 2,9 kg holding force. Is screwed onto the tip of two push-in systems and can also be used as a catching set or for ""fishing"" with smaller pipe cross-sections (electric pipe Ø 16, 20, 25, 32 mm). Scope of supply: 1 x Magnetic ball 1,5 kg Ø 10 mm, 1 x magnetic ball 2,9 kg Ø 14 mm, 2 x starting heads for magnetic adhesion"
Magnet fishing-set STRONG, thread RTG Ø 6 mm, 3-parts, Ø 26 mm/1,0236 in., holding force of 5

Magnet fishing-set STRONG, thread RTG Ø 6 mm, 3-parts, Ø 26 mm/1,0236 in., holding force of 5

56.20 CHF

Magnet fishing-set STRONG, thread RTG Ø 6 mm, 3-parts, Ø 26 mm/1,0236 in., holding force of 5

56.20 CHF"Consists of 2 x initial bulbs for magnetic adhesion and 1 x magnetic ball Ø 26 mm with 5 kg holding force. Is screwed onto the tip of two push-in systems and can also be used as a catching set or for ""fishing"" with larger pipe cross-sections (electric pipe Ø 40, 50 mm and larger). Scope of supply: 1 x Magnetic ball 5 kg Ø 26 mm , 2 x starting heads for magnetic adhesion"
Swivel joint with thread RTG Ø 6 mm, stainless

Swivel joint with thread RTG Ø 6 mm, stainless

29.70 CHF

Swivel joint with thread RTG Ø 6 mm, stainless

29.70 CHFThe swivel joint is made of stainless steel. Used to connect or extend two fiberglass rods Ø 4.5 mm or 6 mm. RUNPOTEC RTG Ø 6 mm thread. However, RUNPOTEC fiberglass rods Ø 7.5 mm, 9 mm, 11 mm or 15 mm with the small dimensions Ø 4.5 mm or 6 mm can also be connected or extended. The swivel joint is also very practical in combination with the function glider or the RUNPOTEC RC 2 multifunction camera. Scope of supply: 1 x Swivel joint with RUNPOTEC RTG Ø 6 mm thread
Pull loop Ø 2 mm/0,0787 in. - with thread RTG Ø 6 mm, Loop length: 50 mm/1,9685 in., stainless steel

Pull loop Ø 2 mm/0,0787 in. - with thread RTG Ø 6 mm, Loop length: 50 mm/1,9685 in., stainless steel

8.70 CHF

Pull loop Ø 2 mm/0,0787 in. - with thread RTG Ø 6 mm, Loop length: 50 mm/1,9685 in., stainless steel

8.70 CHFPractical as a fixing variant, e.g. for attaching cable pulling grip (sock), ropes, cables etc. Alternative to eyelets => higher cable capacity. Suitable for POWER REX, RUNPOSTICKS, fiberglass rods Ø 4.5 mm and Ø 6 mm. Scope of supply: 1 x Pull loop Ø 2 mm with RTG Ø 6 mm thread

<< < 1 2 > >>