Replacement fiberglass GF3 - cable pulling tool, Length: 20 m/65,62 ft., fiberglass rod Ø 3

Replacement fiberglass GF3 - cable pulling tool, Length: 20 m/65,62 ft., fiberglass rod Ø 3

51.10 CHF

Replacement fiberglass GF3 - cable pulling tool, Length: 20 m/65,62 ft., fiberglass rod Ø 3

51.10 CHFReplacement glass fibre rod GF3 Ø 3 mm with kink protection ending joint made of stainless steel and guiding head with twist adjustment and pulling eye Ø 7 mm with RTG Ø 6 mm thread. The specified total breaking load of 130 kg always refers to the entire product (glass fibre rod incl. kink protection ending joints). Optimal field of application: for pipe dimension 10 mm - 50 mm. Scope of supply: 1 x Replacement glass fibre rod GF3 Ø 3 mm, length: 20 m, kink-protection-ending joint on both side (Beginning/ Ending), 1 x guiding head with twist adjustment, 1 x pulling eye Ø 7 mm, 2 x mounting-wrenches
Replacement fiberglass GF3 - cable pulling tool, Length: 30 m/98,43 ft., fiberglass rod Ø 3

Replacement fiberglass GF3 - cable pulling tool, Length: 30 m/98,43 ft., fiberglass rod Ø 3

59.80 CHF

Replacement fiberglass GF3 - cable pulling tool, Length: 30 m/98,43 ft., fiberglass rod Ø 3

59.80 CHFReplacement glass fibre rod GF3 Ø 3 mm with kink protection ending joint made of stainless steel and guiding head with twist adjustment and pulling eye Ø 7 mm with RTG Ø 6 mm thread. The specified total breaking load of 130 kg always refers to the entire product (glass fibre rod incl. kink protection ending joints). Optimal field of application: for pipe dimension 10 mm - 50 mm. Scope of supply: 1 x Replacement glass fibre rod GF3 Ø 3 mm, length: 30 m, kink-protection-ending joint on both side (Beginning/ Ending), 1 x guiding head with twist adjustment, 1 x pulling eye Ø 7 mm, 2 x mounting-wrenches
Replacement fiberglass GF3 - cable pulling tool, Length: 50 m/164,04 ft., fiberglass rod Ø 3

Replacement fiberglass GF3 - cable pulling tool, Length: 50 m/164,04 ft., fiberglass rod Ø 3

72.00 CHF

Replacement fiberglass GF3 - cable pulling tool, Length: 50 m/164,04 ft., fiberglass rod Ø 3

72.00 CHFReplacement glass fibre rod GF3 Ø 3 mm with kink protection ending joint made of stainless steel and guiding head with twist adjustment and pulling eye Ø 7 mm with RTG Ø 6 mm thread. The specified total breaking load of 130 kg always refers to the entire product (glass fibre rod incl. kink protection ending joints). Optimal field of application: for pipe dimension 10 mm - 50 mm. Scope of supply: 1 x Replacement glass fibre rod GF3 Ø 3 mm, length: 50 m, kink-protection-ending joint on both side (Beginning/ Ending), 1 x guiding head with twist adjustment, 1 x pulling eye Ø 7 mm, 2 x mounting-wrenches
Repairing-Kit GF3 - Ø 3 mm/0,1181 in. with thread RTG Ø 6 mm, 15-parts, stainless

Repairing-Kit GF3 - Ø 3 mm/0,1181 in. with thread RTG Ø 6 mm, 15-parts, stainless

43.00 CHF

Repairing-Kit GF3 - Ø 3 mm/0,1181 in. with thread RTG Ø 6 mm, 15-parts, stainless

43.00 CHF15-Part set for repairing glass fibre rods GF3 Ø 3 mm. The patented guiding head (external thread RTG Ø 6 mm) with twist adjustment is optimally suited for the GF3 glass fibre rod Ø 3 mm. The newly developed kink protection makes it possible to overcome bending radii of up to R = 38 mm. An extra large eyelet hole of the enclosed pulling eye ensures a higher cable capacity of up to 7 x 2.5 mm². One drop of the special adhesive is enough for approx. 3 - 5 cm² adhesive surface. Dries within 10 minutes - see safety data sheet for instructions! The mounting wrench can be used to tighten or loosen the guiding head with kink protection. Stainless steel Application film: You can watch a short, very informative application film by scanning the QR code or at www.runpotec.com. Scope of supply: 1 x guiding head with twist adjustment, 2 x kink protection, 2 x mounting wrench, 1 x pulling eye Ø 7 mm, 6 x adhesive joints (brass), 1 x coupling joint, 1 x starting bulb Ø 11 mm
Guiding head with kink protection-Set GF3 Ø 3 mm/0,1181 in. with thread RTG Ø 6 mm, 5-part,

Guiding head with kink protection-Set GF3 Ø 3 mm/0,1181 in. with thread RTG Ø 6 mm, 5-part,

35.70 CHF

Guiding head with kink protection-Set GF3 Ø 3 mm/0,1181 in. with thread RTG Ø 6 mm, 5-part,

35.70 CHFThe patented guiding head (external thread RTG Ø 6 mm) with twist adjustment is optimally suited for the GF3 glass fibre rod Ø 3 mm. The newly developed kink protection makes it possible to overcome bending radii up to R = 38 mm. An extra large eyelet hole of the enclosed pulling eye ensures a higher cable capacity of up to 7 x 2.5 mm². The mounting wrench can be used to tighten or loosen the guiding head with kink protection. Stainless steel Application film: You can watch a short, very informative application film by scanning the QR code or at www.runpotec.com. Scope of supply: 1 x guiding head with twist adjustment, 1 x kink protection, 2 x mounting wrenches, 1 x pulling eye Ø 7 mm
Adhesive joint Set GF3 - Ø 3 mm/0,1181 in., 6 pieces,

Adhesive joint Set GF3 - Ø 3 mm/0,1181 in., 6 pieces,

7.10 CHF

Adhesive joint Set GF3 - Ø 3 mm/0,1181 in., 6 pieces,

7.10 CHFAdhesive joint set made of brass for GF3 glass fibre rod Ø 3 mm. The adhesive joint is glued to the glass fibre rod with the special adhesive and thus serves as a connecting piece between the glass fibre rod and the kink protection ending joint. In this way, any break points can be repaired. Scope of supply: 6 x adhesive joints GF3 Ø 3 mm
Mounting key Set GF3 - 2 pieces, stainless

Mounting key Set GF3 - 2 pieces, stainless

5.00 CHF

Mounting key Set GF3 - 2 pieces, stainless

5.00 CHFMounting wrench set GF3 spare for GF3 glass fibre rod Ø 3 mm. Optimal for screwing the kink protection and guiding head tightly together or for firmly connecting the eyelet to the guiding head. Also has a calibration hole for the glass fibre rod for optimum adaptation to the brass adhesive joints. Scope of supply: 2 x mounting-wrenches, stainless steel
Starting head Ø 11 mm/0,4331 in. with thread RTG Ø 6 mm, stainless

Starting head Ø 11 mm/0,4331 in. with thread RTG Ø 6 mm, stainless

4.70 CHF

Starting head Ø 11 mm/0,4331 in. with thread RTG Ø 6 mm, stainless

4.70 CHF1 x starting bulb Ø 11 mm made of stainless steel for glass fibre rod Ø 3 mm, thread RTG Ø 6 mm. Stainless steel Application film: you can watch a short, very informative application film by scanning the QR code or at www.runpotec.com. Scope of supply: 1 x starting bulb Ø 11 mm with thread RTG Ø 6 mm, stainless steel
Eyelet-Set Ø 7 mm/0,2756 in. with thread RTG Ø 6 mm, 3 pieces, stainless

Eyelet-Set Ø 7 mm/0,2756 in. with thread RTG Ø 6 mm, 3 pieces, stainless

11.60 CHF

Eyelet-Set Ø 7 mm/0,2756 in. with thread RTG Ø 6 mm, 3 pieces, stainless

11.60 CHFStainless steel pulling eyelets for attaching cables for all RUNPOTEC products with RTG Ø 6 mm thread (e.g. POWER REX, RUNPOSTICKS, RUNPO 1, fiberglass rod Ø 4.5 mm, 6 mm etc.) Scope of supply: 3 x Eyelet Ø 7 mm with thread RTG Ø 6 mm

<< < 1 2 > >>