Cable lubricant spray, 400 ml, can with fold-out special attachment (spray over a large area and

Cable lubricant spray, 400 ml, can with fold-out special attachment (spray over a large area and

10.60 CHFOperational area: RUNPOTEC cable lubricant spray, based on silicone, reduces the frictional resistance by up to 40% and thus facilitates the process of pulling cables and wires into electrical installation ducts. Application: Spray RUNPOTEC cable lubricant spray on the cable or the inside of the cable duct. The lubricants contained in the spray are distributed evenly and thus facilitate immediate pulling-in of the cables. Thanks to the special applicator you can spray large areas or precisely and metered with the fold-up spray tube. Shake before use! Product features: Non-flammable, excellent sliding and lubricating effect, no sticking, no drying out, colourless, odourless. Retains its lubricating and non-stick effect for many years. Stains can be removed with conventional cleaning agents. Caution: H229 container is under pressure, may explode when heated. Keep away from heat, hot surfaces, sparks, flames and other ignition sources. Smoking prohibited. Do not force open or burn, even after use. Protect from direct sunlight. Do not expose to temperatures above 50  C/122  F. Keep out of the reach of children. Staining possible on sensitive surfaces. For instructions see safety data sheet! Scope of supply: 1 x Cable lubricant spray 400 ml
Cable lubricant foam, 400 ml, can with fold-out special attachment (spray over a large area and

Cable lubricant foam, 400 ml, can with fold-out special attachment (spray over a large area and

9.30 CHFOperational area: RUNPOTEC cable lubricant FOAM, based on silicone, reduces the frictional resistance by up to 40% and thus facilitates the task of pulling cables and wires into electrical installation ducts. Application: Spray RUNPOTEC cable lubricant FOAM on the cable or in the cable shaft, the contained lubricants distributes itself evenly and thus facilitates immediate cable pulling. Thanks to the special applicator you can spray large areas or precisely and metered with the fold-up spray tube. Shake before use! Product features: Non-flammable, excellent sliding and lubricating properties, no sticking, no drying out, water soluble, VOC-free. Retains its lubricating and non-stick effect for many years. Non-drip, and thus perfect for clean overhead work. Caution: H229 container is under pressure, may explode when heated. Keep away from heat, hot surfaces, sparks, flames and other ignition sources. Smoking prohibited. Do not force open or burn, even after use. Protect from direct sunlight. Do not expose to temperatures above 50  C/122  F. Keep out of the reach of children. Staining possible on sensitive surfaces. For instructions see safety data sheet! Scope of supply: 1 x Cable lubricant foam 400 ml
Calbe lubricant GEL, 1000 g,

Calbe lubricant GEL, 1000 g,

11.50 CHFOperational area: RUNPOTEC cable lubricant GEL reduces the frictional resistance enormously, thus making it easier to pull cables and wires into electrical installation pipes and protecting them from cable damage. Application: Apply RUNPOTEC cable lubricant GEL to the cable or on the inside of the pipe. Also highly effective for the pushing in with cable pushing systems. Product features: Non-flammable, reduces frictional resistance, temperature resistant up to 85 °C, improved sliding effect, silicone-free, water-soluble, non-corrosive, no sticking, skin-friendly, biodegradable.Dissolves without residue. Caution: Seal after use, store in a cool and dry place. Contact with live parts must be avoided. Risk of short circuit! EUH208: Contains 2 methyl-2H-isothiazole-3-one. Can cause allergic reactions. Staining possible on sensitive surfaces. For instructions see safety data sheet! Scope of supply: 1 x Cable lubricant GEL 1000 g
Calbe lubricant GEL, 250 g,

Calbe lubricant GEL, 250 g,

5.80 CHFOperational area: RUNPOTEC cable lubricant GEL reduces the frictional resistance enormously, thus making it easier to pull cables and wires into electrical installation pipes and protecting them from cable damage. Application: Apply RUNPOTEC cable lubricant GEL to the cable or on the inside of the pipe. Also highly effective for the pushing in with cable pushing systems. Product features: Non-flammable, reduces frictional resistance, temperature resistant up to 85 °C, improved sliding effect, silicone-free, water-soluble, non-corrosive, no sticking, skin-friendly, biodegradable. Dissolves without residue. Caution: Seal after use, store in a cool and dry place. Contact with live parts must be avoided. Risk of short circuit! EUH208: Contains 2 methyl-2H-isothiazole-3-one. Can cause allergic reactions. Staining possible on sensitive surfaces. For instructions see safety data sheet! Scope of supply: 1 x Cable lubricant GEL 250 g