GF3 - cable pulling system incl. digital meter counter, length: 20 m/65,62 ft. - fiberglass rod Ø 3

GF3 - cable pulling system incl. digital meter counter, length: 20 m/65,62 ft. - fiberglass rod Ø 3

189.90 CHF

GF3 - cable pulling system incl. digital meter counter, length: 20 m/65,62 ft. - fiberglass rod Ø 3

189.90 CHFGF3 - Cable pulling tool incl. digital meter counter, glass fibre rod Ø 3 mm with kink protection ending joint (internal thread RTG Ø 6 mm) and patented guiding head with twist adjustment (2 x external thread RTG Ø 6 mm). Stowed in a shock-proof plastic box. The box is splash-water and dust-proof, extremely shock-proof and therefore ideally suited for the construction site. The GF3 plastic box can be opened with only a single screw for service work. The glide-back protection prevents the fibreglass rod from accidentally slipping back into the box. Furthermore, the box has an ergonomic carrying handle and an anti-slip coating. The scope of delivery includes an 18-piece accessory set. The newly developed kink protection technology makes it possible to overcome bending radii of up to R = 38 mm. The specified total breaking load of 130 kg refers to the glass fibre rod incl. kink protection joints. Outstandingly suitable in combination with the RUNPOTEC inspection cameras. The cable pulling loop (Ø 14 mm outside) with built-in twist adjustment and protective cap included can be used for one or more cables up to a cable diameter of Ø 12 mm. Quick attachment of the cables to the loop. Any plugs are protected by tensile load on the cable. Optimal field of application: for pipe dimension 10 mm - 50 mm. Application film: You can watch a short, very informative application film by scanning the QR code or at www.runpotec.com.
GF3 - cable pulling system incl. digital meter counter, length: 30 m/98,43 ft. - fiberglass rod Ø 3

GF3 - cable pulling system incl. digital meter counter, length: 30 m/98,43 ft. - fiberglass rod Ø 3

176.90 CHF

GF3 - cable pulling system incl. digital meter counter, length: 30 m/98,43 ft. - fiberglass rod Ø 3

176.90 CHFGF3 - Cable pulling tool incl. digital meter counter, glass fibre rod Ø 3 mm with kink protection ending joint (internal thread RTG Ø 6 mm) and patented guiding head with twist adjustment (2 x external thread RTG Ø 6 mm). Stowed in a shock-proof plastic box. The box is splash-water and dust-proof, extremely shock-proof and therefore ideally suited for the construction site. The GF3 plastic box can be opened with only a single screw for service work. The glide-back protection prevents the fibreglass rod from accidentally slipping back into the box. Furthermore, the box has an ergonomic carrying handle and an anti-slip coating. The scope of delivery includes an 18-piece accessory set. The newly developed kink protection technology makes it possible to overcome bending radii of up to R = 38 mm. The specified total breaking load of 130 kg refers to the glass fibre rod incl. kink protection joints. Outstandingly suitable in combination with the RUNPOTEC inspection cameras. The cable pulling loop (Ø 14 mm outside) with built-in twist adjustment and protective cap included can be used for one or more cables up to a cable diameter of Ø 12 mm. Quick attachment of the cables to the loop. Any plugs are protected by tensile load on the cable. Optimal field of application: for pipe dimension 10 mm - 50 mm. Application film: You can watch a short, very informative application film by scanning the QR code or at www.runpotec.com.
GF3 - cable pulling system incl. digital meter counter, length: 50 m/164,04 ft. - fiberglass rod Ø 3

GF3 - cable pulling system incl. digital meter counter, length: 50 m/164,04 ft. - fiberglass rod Ø 3

229.90 CHF

GF3 - cable pulling system incl. digital meter counter, length: 50 m/164,04 ft. - fiberglass rod Ø 3

229.90 CHFGF3 - Cable pulling tool incl. digital meter counter, glass fibre rod Ø 3 mm with kink protection ending joint (internal thread RTG Ø 6 mm) and patented guiding head with twist adjustment (2 x external thread RTG Ø 6 mm). Stowed in a shock-proof plastic box. The box is splash-water and dust-proof, extremely shock-proof and therefore ideally suited for the construction site. The GF3 plastic box can be opened with only a single screw for service work. The glide-back protection prevents the fibreglass rod from accidentally slipping back into the box. Furthermore, the box has an ergonomic carrying handle and an anti-slip coating. The scope of delivery includes an 18-piece accessory set. The newly developed kink protection technology makes it possible to overcome bending radii of up to R = 38 mm. The specified total breaking load of 130 kg refers to the glass fibre rod incl. kink protection joints. Outstandingly suitable in combination with the RUNPOTEC inspection cameras. The cable pulling loop (Ø 14 mm outside) with built-in twist adjustment and protective cap included can be used for one or more cables up to a cable diameter of Ø 12 mm. Quick attachment of the cables to the loop. Any plugs are protected by tensile load on the cable. Optimal field of application: for pipe dimension 10 mm - 50 mm. Application film: You can watch a short, very informative application film by scanning the QR code or at www.runpotec.com.
GF3 - cable pulling system without meter counter, length: 20 m/65,62 ft. - fiberglass rod Ø 3

GF3 - cable pulling system without meter counter, length: 20 m/65,62 ft. - fiberglass rod Ø 3

127.40 CHF

GF3 - cable pulling system without meter counter, length: 20 m/65,62 ft. - fiberglass rod Ø 3

127.40 CHFGF3 - Cable pulling tool without meter counter, glass fibre rod Ø 3 mm with kink protection ending joint (internal thread RTG Ø 6 mm) and patented guiding head with twist adjustment (2 x external thread RTG Ø 6 mm). Stowed in a shock-proof plastic box. The box is splash-water and dust-proof, extremely shock-proof and therefore ideally suited for the construction site. The GF3 plastic box can be opened with only a single screw for service work. The glide-back protection prevents the fibreglass rod from accidentally slipping back into the box. Furthermore, the box has an ergonomic carrying handle and an anti-slip coating. The scope of delivery includes an 18-piece accessory set. The newly developed kink protection technology makes it possible to overcome bending radii of up to R = 38 mm. The specified total breaking load of 130 kg refers to the glass fibre rod incl. kink protection ending joints. Outstandingly suitable in combination with the RUNPOTEC inspection cameras. The cable pulling loop (Ø 14 mm outside) with built-in twist adjustment and protective cap included can be used for one or more cables up to a cable diameter of Ø 12 mm. Quick attachment of the cables to the loop. Any plugs are protected by tensile load on the cable. Optimal field of application: for pipe dimension 10 mm - 50 mm. Application film: You can watch a short, very informative application film by scanning the QR code or at www.runpotec.com.
GF3 - cable pulling system without meter counter, length: 30 m/98,43 ft. - fiberglass rod Ø 3

GF3 - cable pulling system without meter counter, length: 30 m/98,43 ft. - fiberglass rod Ø 3

141.00 CHF

GF3 - cable pulling system without meter counter, length: 30 m/98,43 ft. - fiberglass rod Ø 3

141.00 CHFGF3 - Cable pulling tool without meter counter, glass fibre rod Ø 3 mm with kink protection ending joint (internal thread RTG Ø 6 mm) and patented guiding head with twist adjustment (2 x external thread RTG Ø 6 mm). Stowed in a shock-proof plastic box. The box is splash-water and dust-proof, extremely shock-proof and therefore ideally suited for the construction site. The GF3 plastic box can be opened with only a single screw for service work. The glide-back protection prevents the fibreglass rod from accidentally slipping back into the box. Furthermore, the box has an ergonomic carrying handle and an anti-slip coating. The scope of delivery includes an 18-piece accessory set. The newly developed kink protection technology makes it possible to overcome bending radii of up to R = 38 mm. The specified total breaking load of 130 kg refers to the glass fibre rod incl. kink protection ending joints. Outstandingly suitable in combination with the RUNPOTEC inspection cameras. The cable pulling loop (Ø 14 mm outside) with built-in twist adjustment and protective cap included can be used for one or more cables up to a cable diameter of Ø 12 mm. Quick attachment of the cables to the loop. Any plugs are protected by tensile load on the cable. Optimal field of application: for pipe dimension 10 mm - 50 mm. Application film: You can watch a short, very informative application film by scanning the QR code or at www.runpotec.com.
GF3 - cable pulling system without meter counter, length: 50 m/164,04 ft. - fiberglass rod Ø 3

GF3 - cable pulling system without meter counter, length: 50 m/164,04 ft. - fiberglass rod Ø 3

168.00 CHF

GF3 - cable pulling system without meter counter, length: 50 m/164,04 ft. - fiberglass rod Ø 3

168.00 CHFGF3 - Cable pulling tool without meter counter, glass fibre rod Ø 3 mm with kink protection ending joint (internal thread RTG Ø 6 mm) and patented guiding head with twist adjustment (2 x external thread RTG Ø 6 mm). Stowed in a shock-proof plastic box. The box is splash-water and dust-proof, extremely shock-proof and therefore ideally suited for the construction site. The GF3 plastic box can be opened with only a single screw for service work. The glide-back protection prevents the fibreglass rod from accidentally slipping back into the box. Furthermore, the box has an ergonomic carrying handle and an anti-slip coating. The scope of delivery includes an 18-piece accessory set. The newly developed kink protection technology makes it possible to overcome bending radii of up to R = 38 mm. The specified total breaking load of 130 kg refers to the glass fibre rod incl. kink protection ending joints. Outstandingly suitable in combination with the RUNPOTEC inspection cameras. The cable pulling loop (Ø 14 mm outside) with built-in twist adjustment and protective cap included can be used for one or more cables up to a cable diameter of Ø 12 mm. Quick attachment of the cables to the loop. Any plugs are protected by tensile load on the cable. Optimal field of application: for pipe dimension 10 mm - 50 mm. Application film: You can watch a short, very informative application film by scanning the QR code or at www.runpotec.com.
Replacement fiberglass GF3 - cable pulling tool, Length: 20 m/65,62 ft., fiberglass rod Ø 3

Replacement fiberglass GF3 - cable pulling tool, Length: 20 m/65,62 ft., fiberglass rod Ø 3

51.10 CHF

Replacement fiberglass GF3 - cable pulling tool, Length: 20 m/65,62 ft., fiberglass rod Ø 3

51.10 CHFReplacement glass fibre rod GF3 Ø 3 mm with kink protection ending joint made of stainless steel and guiding head with twist adjustment and pulling eye Ø 7 mm with RTG Ø 6 mm thread. The specified total breaking load of 130 kg always refers to the entire product (glass fibre rod incl. kink protection ending joints). Optimal field of application: for pipe dimension 10 mm - 50 mm. Scope of supply: 1 x Replacement glass fibre rod GF3 Ø 3 mm, length: 20 m, kink-protection-ending joint on both side (Beginning/ Ending), 1 x guiding head with twist adjustment, 1 x pulling eye Ø 7 mm, 2 x mounting-wrenches
Replacement fiberglass GF3 - cable pulling tool, Length: 30 m/98,43 ft., fiberglass rod Ø 3

Replacement fiberglass GF3 - cable pulling tool, Length: 30 m/98,43 ft., fiberglass rod Ø 3

59.80 CHF

Replacement fiberglass GF3 - cable pulling tool, Length: 30 m/98,43 ft., fiberglass rod Ø 3

59.80 CHFReplacement glass fibre rod GF3 Ø 3 mm with kink protection ending joint made of stainless steel and guiding head with twist adjustment and pulling eye Ø 7 mm with RTG Ø 6 mm thread. The specified total breaking load of 130 kg always refers to the entire product (glass fibre rod incl. kink protection ending joints). Optimal field of application: for pipe dimension 10 mm - 50 mm. Scope of supply: 1 x Replacement glass fibre rod GF3 Ø 3 mm, length: 30 m, kink-protection-ending joint on both side (Beginning/ Ending), 1 x guiding head with twist adjustment, 1 x pulling eye Ø 7 mm, 2 x mounting-wrenches
Replacement fiberglass GF3 - cable pulling tool, Length: 50 m/164,04 ft., fiberglass rod Ø 3

Replacement fiberglass GF3 - cable pulling tool, Length: 50 m/164,04 ft., fiberglass rod Ø 3

72.00 CHF

Replacement fiberglass GF3 - cable pulling tool, Length: 50 m/164,04 ft., fiberglass rod Ø 3

72.00 CHFReplacement glass fibre rod GF3 Ø 3 mm with kink protection ending joint made of stainless steel and guiding head with twist adjustment and pulling eye Ø 7 mm with RTG Ø 6 mm thread. The specified total breaking load of 130 kg always refers to the entire product (glass fibre rod incl. kink protection ending joints). Optimal field of application: for pipe dimension 10 mm - 50 mm. Scope of supply: 1 x Replacement glass fibre rod GF3 Ø 3 mm, length: 50 m, kink-protection-ending joint on both side (Beginning/ Ending), 1 x guiding head with twist adjustment, 1 x pulling eye Ø 7 mm, 2 x mounting-wrenches